Italian Black Riven Slate Hearth, Honed Fireplace Hearth

Joh***Wrote:

I need a price for a black riven slate 1050mm quadrant hearth. Could you price 20mm and 30mm if available. Square edge.

Ros***Wrote:

Please can you price supply of a 20mm thick TWO piece Italian riven slate hearth, inner section 610mm wide x 330mm deep and outer section 1325mm wide x 350mm deep with front and sides chamfer polished, delivery to Maidenhead, Berks SL6. Thanks

Kir***Wrote:

.Hi, Can you quote me for Italian slate honed teardrop hearth 1000mm x 1000mm x 30mm Delivery to Steyning BN44. Regards, Kirstie Elliott Sent from my iPad

Mr ***Wrote:

I am looking for Black Brazilia honed edged hearth slab 1400mm x 400mm with a 1m x450 mm recess 30mm thickness

Joh***Wrote:

could you give me a qoute for a italian black riven hearth .the measurements are,lenght 54" width 18" , with three rounded edges, 50mm thick .t Then could you cut it into 4 equal lenghts.(like 4 slabs ) Thankyou john .

Ste***Wrote:

Hi I am looking at building a slate hearth in 2 pieces. The back piece fitting in the recess and the front piece adjoining. The rear piece is 945mm x340mm, and requires no edging. The front is 705mm x 340mm and requires edging along one long edge and both short edges. These dimensions allow for a slight expansion gap. I would like a quote for both Riven italian black, and the fine rubbed Brazilian which is I believe to be smooth but not shiney and very mat (is that correct) Thanks

Ale***Wrote:

I am looking for Italian Black Riven Slate Hearth, Honed Fireplace Hearth.

Lin***Wrote:

I am looking for a Slate Hearth, Honed finish satin smooth. This is to match a Dru Trio Gas Stove www.drufire.com/en-gb/product-range/dru/trio 591 mm depth 640 mm width 20m thick with a slow curve around the front edge. Please can you forward me a price? We are in Lancashire area. Many thanks

Cla***Wrote:

I am looking for Italian Black Riven Slate Hearth, Honed Fireplace Hearth. Not sure on size yet, but it is to fit a small fireplace housing a 5kw multi fuel stove. All the hearths I have been offered are in tile formation but I don't want that. Can you give me an idea of the costs involved with a continuous piece made to order. Many thanks Claire mcguire

Kar***Wrote:

I am looking for Italian Black Riven Slate Hearth, Honed Fireplace Hearth. Also do you deliver to Dublin in the Rep of Ireland ... I'm looking for a piece like this for beneath a free standing multi fuel stove approx size req'd 1500 m by 800? Thanks in advance for your help. Thanks Karen

Rac***Wrote:

I am looking for Italian Black Riven Slate Hearth, Honed Fireplace Hearth. 1000mmx 300mm x 30mm thickness, with a slow curve across the front edge, could you give me a price please

Joh***Wrote:

Can you please give me a quote for a 20mm thick slate worktop to fit around my chimney breast as per attached drawing. I imagine it will be too fragile to make in one piece, so 2 or 3 pieces would be okay. Thanks John Goode