Basalt Quarry Drill Machine in India

MACHINE CAN DRILL HOLES RANGING FROM 3" TO 7" IN DIAMETER UPTO A DEPTH OF 25 METERS HORIZONTALLY AND VERTICALLY.
MACHINE COMES WITH AUTO DRILLING CONTROL PANEL, DTH HAMMER, 4.5" BUTTON BIT AND 12 DRILL RODS(4FEET).

Single Pass: 7.1mtrs.
Features:
Air Conditioning Operator’s Cabin
Dust Collector system
Heavy Duty Undercarriage
Controls are Grouped for convenient Operation
SP-200 are widely used in open cast mines such as Coal,Iron Ore, Limestone,Copper, Phosphate, Bauxite etc…for drilling & Blasting purposes

LD-4 (LINE DRILL MACHINE) (TECHNICAL SPECIFIATION)
Mode of Drilling NG
Down the Hole Air Hammer AIR HAMMER
Hole Diameter 90mm ~ 115mm (3 ½” ~ 4½”)
Max. Drilling Depth (Vertical) 30 Mtrs. (100 ft)
Max. Drilling Depth (Horizontal) 20 Mtrs. (65 ft)
Drill Pipe Diameter 60mm / 76mm (2” / 3”)
Drill Pipe Length 1.22mtrs. (4ft)
Rotary Head 4 Cylinder Piston type Air Motor with spur type Reduction Gearbox
BHP 4.5
RPM 0-50
Max. Torque 1125Nm (10,000 lbf.in)
Free Unit
4 Cylinder Piston type Air Motor with spur cum worm drive Gearbox
BHP 4.5
Type of Feed Chain feed
Pull Down Force 0~2200 kg
Pull Up Force 0~2200 kg
Pull Up & Pull Down Speed 0~ 15 mtrs./min

Slim Drill Machine LD4 Description
Pneumatically Operated Drill Capable Of Drilling In Both Down The Hole Jack Hammer Modes-Ideally Suitable For Drilling Lead Holes For Diamond Wire Cutting Of Decorative Marble, Granite Rocks, Etc. The Machine Has Been Specially Designed For Precision Drilling Of Matching Holes And The Ability To Drill Holes In Both Vertical And Horizontal Positions. A Ball Joint Is Provided At The Bottom Of The Mast To Facilitate Precision Alignment For Matching Holes. Provided With One Spike Two Anchoring Rods Adjusting Screws To Maintain Perfect Rigidity During Drilling. Light In Weight, The Machine Can Be Easily Dismantled Into Four Subassemblies-Each Weighings Not More Than 50 Kg – Thus Ensuring Easy Portability And Repositioning.
Supplier And Dealer Of All Typer Of Rock Drilling Equipment In India, Telangana, Andhra Pradesh, Hyderabad, Ongole. Rock Drilling” Has Always Been An Arduous Task And In The Above Context-We Take Pleasure In Introducing “MINCON” Rock Drilling Equipments. Mincon Rock Drills Is A Manufacturer Of Rock Drilling Equipment, Committed To Providing The World Drillers With Drilling Rigs Of The Highest Standards. It Is Through Continuous Research And Development That We Are Able To Bring Our Customers The Very Best That Is Available To Complete The Most Difficult Drilling Tasks In The Toughest Conditions.

JRD Air Crawler Drill capable of drilling Holes Dia90 – Dia120mm (3½”- 4¾”) to a depth of 36.0mtrs used in open Cast Mines for Drilling and Blasting Purposes. JRD CD-110 Air Crawler Drill is a self-propelled crawler type drill, designed for drilling holes in vertical and horizontal planes. The drill Guide, boom, controls are all mounted on a heavy duty track assembly. JRD Radial Piston type Air motors are designed with well balanced and nil vibrations provide smooth operation of Rotary Head, Feed unit, Propelling unit and driving Hydraulic Pump for operation of seven Hydraulic Cylinders. The Ruggedly constructed Track (Crawler) demonstrates effortless manoeuvrability on rough ground. Track oscillation system through hydraulic cylinders is provided allowing the track to flex up on either side thus providing positive ground contact while tramming over rough terrain. Tramming power is supplied by two Powerful Piston type Air Motors with Self-braking reduction gearbox directly connected to final drive to minimize power loss and ensure drive efficiency. This is enough to tram the CD-110 with its compressor in tow right to the job site.

SPECIAL FEATURES
Rugged Constructions
Stable drilling capabilities
Structurals designed for extra rigidity
Widest Choice of Down Hole Drill or Top Hammer
Heavy Duty Tow Hitch
Track tensioning arrangement
Track Oscillation through Hydraulic Cylinders
Heavy-Duty Radial Piston type Air propelling motors with Self-breaking arrangement

Special Heavy Duty SKID Mounted Drilling Rig for drilling Angular holes from 20 degree horizontal to Vertical specially used for drilling Grout holes for Strengthening of Foundation. The Mast is capable of handling 76mm dia ODX1.5mtrs (5ft) Drill Pipe fitted with Rotation unit & feed unit. The Mast is raised & lower by Hydraulic Cylinder operated by direction control valve & double lock Check Valve.
SPECIAL FEATURES
Stable Drilling capabilities
Structural designed for extra rigidity
Anchoring arrangement ensures perfect stability during drilling
Centralized sensitive controls with auto feed arrangement ensure easy operation and reduction of operation fatigue