Quarry Diamond Wire Saw in Italy

Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features:

Diamond wire running system by electric motor

The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:

• 2 HP motor for the quick positioning of the machine on the rail.

• 0.5 Hp motor with automatic reduction gear for fine regulations.

The feeding on the rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding. The " S 1000" is featured by a special "electro-hydraulic" system for flywheel positioning. The rotation and a lateral movement of 40 cm per side are hydraulic, with solenoid valve control. A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width 2.0 mt. without moving the machine.

Special feature:

The machine is provided with special blower heating system for flywheel, to reduce icing during winter work.

Technical details:

Main motor power 50-60-75-100Hp

Feed motors power 2 Hp fast - 0.5 slow

Flywheel Ø 1000 mm

Wire speed : 40 Mt / Sec.

Width of cuts 0 - 2,0 Mt

Total weight 1800 Kg.

The LGR 1 machine was build for execution of little diamond wire cutting on marble, stones, etc., but also in order to solve problems in building and artistic processing. The effectiveness of LGR 1 machine is confirmed by the extreme ease of working and the processing and cutting speed of the diamond wire. Thanks to this system the operations can be carried out without dust, noise and vibration, being able to perform cutting of any thickness, size and slant on stones like squaring or preparatory bevelled cut of monuments, but also on reinforced concrete, like demolition of base, walls, pillars, stairs, bridges and roads.

The possibility of disassembling the machine into three parts as well as its lightness make the transport easy into small yards and those which are difficult to access. Thanks to its characteristics LGR 1 machine allows to execute operations with diamond wire with the best conditions; in fact it can also carry out several cutting edges with different sloping degrees thanks to a total rotation (360°) of the engine flywheel unit and thanks to the manual slide which allows to obtain a perfect alignment between the machine flywheel and the cutting edge.

The electronic control system allows the best use of the machine and of the diamond tool according to the characteristics of cutting. Lochtmans’ diamond wire cutting machines are equipped with accident prevention system in order to avoid risks for workers who operate or work near the machine, because the breaking of diamond wire can create projection of circuit elements (matchboards, spacers, springs or parts of cable) and the consequent whip action of the cable.

LGR 1 machine is equipped with a very practical and functional protection system. Thanks to the protection racket and to a simple movement, it can be possible to set the fillet protection device in any positions of the flywheel engine. The protection device is extensible and it can reach all the open path of diamond wire, also when the machine is in motion. While the machine is moving the screen belt lets off covering the area where the diamond wire goes open, being an effective element of protection.

Gran Fil- Diamond Wire saw for cutting granite, marble with main motor power of 50 HP and double wire speed (17 and 25 m/sec)

Diamond Wire machines VIP 910
ELECTRONIC DIAMOND WIRE SAW
Machine properly studied and manufactured to cut big blocks, boulders and benches, when diamond wire speed adjustment is required. An inverter device is used to control and constantly adjust the diamond wire speed from 0 to 40 m/sec., according to the type of stone. The combination with the automatic feeding system by means of “supercard” or inverter, allows a very accurate management of the cutting tool and a very smooth and precise movement of the machine on the rails. It is possible to make two parallel cuts 170 or 200 cm wide and a complete rotation of 360° to cut on any angle, by means hydraulic device. The same device allows to make horizontal cuts at ground level without the use of any auxiliary accessories.

Starter: Star delta diretto/Star Delta or direct
Travel motor: Motore CC 1 HP vel. varianile1/Hp variable DC motor
Wire tension: automatic controlled by a supercard

Dazzini Macchine Series 1000-Diamond wire cutting machine
Wirecutter of last generation, it can be considered as a landmark in its field. It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed. The whole controls are fully automatic and don't require the constant presence of the operator.Technical features:
Diamond wire running system by electric motor
The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:
•2 HP motor for the quick positioning of the machine on the rail.
•0.5 Hp motor with automatic reduction gear for fine regulations.
The feeding on the rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding. The " S 1000" is featured by a special "electro-hydraulic" system for flywheel positioning. The rotation and a lateral movement of 40 cm per side are hydraulic, with solenoid valve control. A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width 2.0 mt. without moving the machine.
Special feature:
The machine is provided with special blower heating system for flywheel, to reduce icing during winter work.
Technical details:
Main motor power 50-60-75-100Hp
Feed motors power 2 Hp fast - 0.5 slow
Flywheel Ø 1000 mm
Wire speed : 40 Mt / Sec.
Width of cuts 0 - 2,0 Mt
Total weight 1800 Kg.

TD 25 Diamond wire saw for block dressing and small cuts in the quarry.

This is the smallest and most manageable machine. The 18 kW GB 6-pole main motor drives a 60 cm flywheel and can be rotated

mechanically over 360° for cuts at any angle.

OPTIONAL: inverter on a mobile control panel for variable wire

speed (0-30 m/s)

Machines for medium size cuts in massive rock. The main electric motor GB (30, 37 or 45 kW, 6 poles) carries the 80 cm aluminium flywheel. Two

reducer assemblies - manually operated for the basic machine, electrically for Super machines - allow 360° rotation and lateral shift of the fly-wheel so that two parallel cuts can be made.

TELEDIAM 80 TD 80 (-100) Diamond wire saw for cutting large benches

Machine for large cuts in massive rock. The main electric motor (56

kW, 8 poles) is started by a star-delta system, and the motor shaft

carries the 102 cm aluminium flywheel. Two reducer assemblies

with electric drive allow 360° rotation and lateral shift of the flywheel

so that two parallel cuts can be made. OPTIONAL: inverter for

variable wire speed (0-30 m/s).

TDD 100-120 Super Diamond wire saw with a Diesel engine and a hydraulic converter to cut benches of any size in marble and/or granite.

Machine designed for large quarry cuts. The Diesel engine (VM, 4 cylinders, 90kW, air-cooled) is connected GB to the main aluminium flywheel Ø 102 cm through a hydraulic converter and an orthogonal gearbox. The gearbox unit can rotate 360° and can be shifted across the machine on chromed guides to allow two parallel cuts to be made at adjustable distance. Two electric sockets are provided (single phase 220V and threephase 380 V) with automatic switches, for small external loads

Model KM / KG
Power of main electric motor 50 / 60 Hp
Diamond wire saw speed ( with inverter ) from 0 up to 41mt/sec
Rotation cutting head 360°
Hydraulic lateral translation 1600mm
Weight of the machine 1560 / 1600 kg
The wirecutters KORFMANN are equipped with hydraulic positioning system and electronic control of advance. The version G for granite have diamond wire speed control by electronic inverter.