Rock Crushers, Jaw Crushers in Turkey

FTJ 11-75 Tracked jaw crushers are a type of crusher used to crush large stones into small pieces. These crushers can be easily used in different places thanks to their mobility, and due to these features, they are frequently preferred in the mining and construction sectors.
The working principle of these breakers is quite simple. Large stones are first placed in the feed hopper and then dropped between the jaw plates. Jaw plates compress and break the stone into smaller sizes. Then, the crushed stones are transported by conveyor belts and unloaded to the desired location.
Mobile jaw crushers have many advantages. First of all, because they are mobile, they can be used in different work areas. Additionally, since they are portable, they are easy to install and can be used independently. Besides these, mobile jaw crushers are economical due to their low operating costs and easy maintenance requirements.
The usage areas of mobile jaw crushers are quite wide. They are also used in the production of various building materials in the construction industry. In addition, they are widely preferred in crushing operations in quarries.
As a result, mobile crusher plants are one of the important equipment in the mining and construction sectors. Thanks to their mobility, they can be used in different places and are preferred due to their economic costs.#jawcrsuher#trackedcrusher#hardstonecrusher

The GENERAL 944 Closed Circuit Crushing and Screening Plant is able to transport the entire system on a single chasis and move comfortably with a truck.
It can be easily operated in 30 minutes and the product can be obtained.
It is the last crusher facility which can be used to break natural stones such as hard and brittle stone (basalt, granite) and mines (Iron ore, chrome mine, quartz).
* Jaw Crusher (Crusher)
Dimension: 900x650 mm Primer type
Engine power: 75-90 Kw
Adjustable mechanism and jaw crusher can be easily adjusted.
* Main Conveyor Belt System 800 mm
Pallet type conveyor is rubber.
* Vibrating Screen System High Capacity Type
Dimension: 1600x5000mm
Engine Power 15 KW
Number Of Floors: 3 Floors
* Hydraulic Cone Crusher Unit
Feed size is max. 210 mm
Crusher Engine 132 KW
Hydraulic and lubrication unit
Motor box
V-belt
Motor stand
Machine with its own linings
Hydraulic cylinder adjustment and compression ring
Overload protection provided by two-sided cylinders and accumulators
Counter shaft system
Conical head system with internal bearings and spherical bearings
Eccentric system
Set-up box and hydraulic motor crusher top sieve system
Lubrication / Hydraulics
* Under-Screen Stock Conveyor 1000 mm
Folding type
* Stock Conveyor 2 units 600 mm Folding type
* 2. Crusher Main Belt Conveyor 5000 mm Folding type
* Mobile Chassis System 3-Axis Special Constructed Chassis
* Hydraulic System
There are 6 hydraulic foot mechanisms in the system, after these feet are locked, they are strengthened with 6 Fixed feet.
Hydraulic Power System 125 Liter
Magnetic Conveyor Belt 750 mm (Optional)
* Clipboard Material is Schneider Electric or Telemecanique Mark.
* Board System has Abb Soft Starter system and special control system.
All functions can be controlled with Remote Control (Radio Control System).
Generator System Optional, 6 Cylindrical diesel engine and Marelli Alternator of Cummins, Perkins, Doosan, Deutz brands.
Capacity: Material to be Shredded and Feeding, Variable according to the final product sizes, Capacity is 160 - 240 tons.
Dust Removal System, dust is prevented by spraying high pressure water nozzle to suppress dust in conveyors.
Feeders are Vibromotor Emtas or Italvibras, Oli Brand.
Drive Drums are Rubber Coated and Threaded.
Electric Motors are Gamak, Emtaş, Inter Mark.
Gearboxes are special gearboxes with 3 gears.
Conveyor Belt Tires Derby or Eksaş Brand.
Bearings: SKF or Equivalent Bearings
The flat product used is Eregli Iron and Steel Product and it is A1 Size.
* By-pass system (optional)
* Magnetic magnet (optional)
* Generator System (optional)
* Additional Hopper to feed with truck (optional)
* Dust Removal System (optional)
* Frequency Control System is used instead of Soft Starter.
Approximate fuel consumption 30 - 35 Lt / hour (Optional)
** Shipping Dimensions: Width 3000 mm x Length 15.000 mm x Height 4500 mm
** All our products are European Union CE certified.

GNR - MC110 Mobile jaw crusher is designed to crush hard materials such as basalt, granite. The GNR - MC110 mobile crusher is the ideal solution for companies who prefer a mobile crusher.
1. VIBRATING FEEDER
1.1. Bunker
- Capacity : 35 m³
Side Bunker sheets are supported from the outside with a "U" profiles to prevent erosion during truck feeding.
1.2. Vibrating Feeder
- Model : GNR110
- Size : 1100x4750 mm
- Drive : 2x11 kW 1000 r/m vibro motor.
1.3. Jaw Crusher Maintenance Platform and Cabinet

2. JAW CRUSHER
- Model : GNRK-110
- Size : 1100x850 mm
- Drive : 132 kW 1000 r/m - electric motor
- Jaws … : % 16-18 Mn. 2.2 Cr Steel Casting
- Pitman : Special production subject to normalization
- Flywheels : GG22 gray cast iron. Shaft flywheel connection
- Body : 50 mm DIN 17100 material, welded and bolted construction.
- Bearings : Heavy duty, Spherical roller bearing, Spherical roller bearing
- Eccentric shaft : Cr.Ni.Mo. alloy steel.
- Flywheel speed : 228 rpm.
- Hydraulic jaw opening adjustment mechanism.
- Bolt system for easy maintenance of belt and flywheel housing.

3.PRIMARY IMPACT CRUSHER
- Model : GNR-PDK 01
- Rotor Diameter : 1400 mm
- Rotor Width : 1500 mm
- Drive : 160 KW X 2 Electric motors – 1450 rpm
- Max. Feed Size : 1200 mm
- Pallets : GX120 Mn 12 (16-18% Manganese) steel casting
- Rotor Shaft : Ch 4140 alloy steel.
- Body sheet thickness : 25 mm, St37
- Body Backing : Manganese casting with a thickness of 30 mm.
- Bearings : Heavy duty type, Spherical roller bearing, Spherical roller bearing - Crusher For easy maintenance and repair, crusher hydraulic system to open and close the upper body hydraulically.

4. VIBRATING SCREEN
- Model : GNR2060
- Dimension : 2000x6000 mm
- Number of Deck : 3 Deck
- Drive : Drive from center, 30 KW – 1500 rpm
- The beds are liquid lubricated.
- SKF or FAG brand bearings.
- Adjustable eccentric weight for vibration control.
- Screen body is one piece of sheet.
- The screen will work on 8 springs in total.
- A maintenance platform will be installed on 3 sides of the screen.
- Heavy duty type
- Sieves 6 mm, ERD 9435 lined.

5. DOUBLE SCREW CLASSIFIER
800X8000 mm
DOUBLE
11 kW x 2 Pcs Motor
6.CONVEYOR BELTS
7. ELECTRIC PANEL AND REMOTE-CONTROL SYSTEM

GENERAL 950 MOBILE CRUSHER with its new system, it is the first in Turkey!!!
New System Crushing and Screening Plant, with 150-240 tons / hour capacity. Ideal for crushing granite and basalt.
GENERAL 950 Closed Circuit Crushing and Screening system is all collected in one single platform and can be easily transpoted with one truck. These group crushers have designed for short term installation.
It is the most suitable for crushing hard stones (basalt, granite) and mines (iron ore, chrome mine, quartz).
It is the ideal crushing unit to crush the abrasive materials.

* Vibrating Feeder and Bunker
The feeder system is driven by two vibromotors. At this count, trouble-free and minimal maintenance is offered.
The feeder reservoir is suitable for feeding with Excavator and Loader and can be fed in the truck with additional reservoirs during continuous operation.
All wear points in the feeder and in the bunker are protected by wearable armor.
The Feeder Tablet has a screening system. Thanks to the by-pass conveyor, sifted ground material can be poured into the stock area.
* Jaw Crusher
Size : 900x650 mm Primary type
Motor Power : 75 Kw
Adjustable mechanism and jaw crusher can be easily adjusted.
* Main Conveyor Belt 800 mm
Pallet type, rubber conveyor.
* High Screen Capacity, Dual Transverse Screener.
Size : 1600x5000mm
Motor Power : 15 KW
Number of decks : 3
*Secondary Impact Crusher (Hard Material Crusher)
1200x1400 mm Special type Secondary Impact Crusher system
Engine : 160 Kw
* Under-Sieve Stock Conveyor Belt 1000 mm Scorpion Model
* Stock Conveyor Belt x 2 pcs 600 mm Folded type
* Mobile Chassis 3-axle Chassis Special constructed Chassis
* Hydraulic System
* Thanks to 8 hydraulic feet and 8 fixed feet provides easy installation.
* The electric panel is Siemens brand
* Panel System has Siemens Soft Starter system and special control system. All functions can be controlled with Remote Control (Radio Control System). The special touch screen remote control system provides easy installation.
Generator System Optional, 6 Cylindrical diesel engine and Marelli Alternator of Cummins, Perkins, Doosan, Deutz brands.
Capacity: Capacity is 160 240 t/h, it depends on crushing material, feding size and final sizes.
The dust removal system prevents dusting by conveying high pressure water to the nuzzle to prevent the dusting.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Conveyor Belt Tires Derby or Eksash Brand.
Bearings: SKF or FAG Bearings
The Iron and Steel Products used are Eregli Brand and A1 quality.
* By-pass system
* Magnetic magnet (optional)
* Generator System (optional)
* Additional hopper to feed with truck
* Dust Removal System
* Frequency Control System is used instead of Soft starter.
This system allows to adjust the working speed of the crusher. Moreover, thanks to this system it is possible to work without demurrage, low generator selection and low fuel consumption. Approximate fuel consumption 30 - 35 Lt / hour (Optional)
** All of our products are CE certified.
** Shipping Dimensions: Width 4300 mm x Length 18.800 mm x Height 4330 mm
Weight: 70.000 Kg

GENERAL 640 Closed circuit Crushing system, the whole system is collected on one platform and can be transported with 1 truck.
It is designed for operation within 30 minutes.
It is the most suitable for crushing hard and hard-to-break stone (basalt, granite) and mines (iron ore, chrome mine, quartz).
It is the ideal breaker unit to break the abrasive materials.
Vibrating Feeder and Reservoir
The feeder system is driven by 2 vibro motors. In this way, it is smooth and operation is provided with minimum maintenance.
The feeder reservoir is suitable for feeding with Excavator and Loader, and can be fed in the truck with additional chambers in continuous operation.
All wear points in the feeder and in the reservoir are protected by wearable armor.
The Feeder Tablet has a screening system. Thanks to the by-pass conveyor, this sifted ground material can be poured into the stock area.
Jaw Crusher
Dimension: 600x400 mm Primer type
Engine power: 30-37 Kw
Adjustable mechanism and jaw crusher can be easily adjusted.
- Main Conveyor Belt System 600 mm
Pallet type conveyor is rubber.
- Vibrating Screen System High Capacity Type
Dimension: 1300x4000mm
Engine Power 11 KW
Number Of Floors: 3 Floors
Secondary Impact Crusher (Hard Material Crusher)
1120 x 500 mm Special Type Impact Crusher System
Engine: 90 Kw - 110 Kw
Tonnage By Request
1000 x 750 mm Special Type Secondary Impact Crusher System
Engine: 45 Kw
Under-Screen Stock Conveyor 800 mm
Folding type
- Stock Conveyor 2 units 500 mm Folding type
- 2. Crusher Main Belt Conveyor 5000 mm Crisscross type
- Mobile Chassis System 3-Axis Special Constructed Chassis
- Hydraulic System
There are 4 hydraulic foot mechanisms in the system. After these feet are locked, they are strengthened with 6 Fixed feet.
There are also 2 lift pistons for opening and closing in the crusher. These 6 pistons are controlled by special control system.
Hydraulic Power System 125 Liter
Magnetic Conveyor Belt 750 mm (Optional)
- Panel Material is Schneider Electric or Telemecanique Mark.
- The board system has the Abb Soft Starter system and special control system.
- All of our products are European Union CE certified.
- Total weight: 32,000 Kg
- Transportation Measurements: Width 3600 mm x Length 17.000 mm x Height 4500 mm

Feeding range 1500 x 1300mm
Rotor: 1400 x 1500 mm Crusher There are 2 special chambers that provide thinning.
Motor Power 200 Kw - 250 Kw Thanks to special adjustment blocks, Primer has been collected in one machine with secondary function.
It is unprecedented with high reduction rates of up to 50 times.
Main Conveyor Belt System 1000 mm conveyor belt rubber.
Vibrating Screen System High Capacity Type
Dimension: 2000 x 5000mm
Motor Power 22 Kw Floor Number: 3-4 Floors
Under-Screen Stock Conveyor 1000 mm Folding type
Stock Conveyor 2 pieces 800 mm Folding type
Return system is provided with 2 pieces of 600 mm 2 conveyor belts.
Mobile Chassis System 3 Mobile system with axle scissors.
Hydraulic system has 6 hydraulic foot mechanisms. After these feet are locked, they are strengthened with 6 Fixed feet.
The crusher also has 2 lift pistons for opening and closing. These 2 Pistons are controlled by special control system. The product size is determined by 2 pistons which determine the pandul setting and the product size and also with a special arm.
Hydraulic Power System 125 Liter
Magnetic Conveyor Belt 600 mm (Optional
Panel Material is Siemens Brand
Board System has Abb Soft Starter system and special control system.
Remote Control (Cable Control System) can be done with the crusher control. It can self-assemble by amperage system.
Generator System Optional, 6 Cylindrical diesel engine and Marelli Alternator of Cummins, Perkins, Doosan, Deutz brands. (Optional
Capacity Breaking Material and Feeding, It is 250-300 ton Capacity according to final product sizes.
Dust Removal System In order to suppress the dust in the conveyors, high pressure water is sprayed to prevent dusting. (Optional
Feeders are Vibromotor, Emtas, Italvibras, Oli Brand.
Main Belt Drive Drum Rubber Coated and Threaded.
Electric Motors are Gamak, Emtaş, Inter Mark.
Gearboxes are special gearboxes with 3 gears.
Conveyor Belt Tires Derby, Eksaş and Ycel Brand.
Roller Bearings: SKF or equivalent Bearings Used for flat products are Ereğli Iron and Steel Products and are of A1 Size.
By-pass system (optional
Magnetic magnet (optional
Generator System (Optional
Additional reservoir to feed with truck (Optional
Dust Removal System (Optional
Frequency Control System is used instead of Soft Starter (Optional
This system allows to adjust the run time of the crusher. In addition, with this generator, it is possible to work without load, low generator selection and low fuel consumption. Approximate fuel consumption 19 - 21 Lt / h (Optional
All our products are European Union CE certified.
Total Weight: 60,000 Kg
Shipping Dimensions: Width 4.200 mm x Length 17,000 mm x Height 4,500 mm
We are proud to offer you GENERAL 03 with 35 years of experience.
Our Company General Makina is located in Turkey.

The feed chute 500 x 700mm
Rotor: 1100 x 1000 mm
The Crushers are 2 special containers that allows the refining.
Engine power 160 kW thanks to special tuning blocks of primary, secondary functions collected in a single machine.
Up to 50 times it is unique with high reduction ratios.
* Main Conveyor Belt System is 800 mm rubber conveyor belt.
* Vibrating Screen System High Capacity Type
Size: 1400 x 4000mm
Engine power 11 kW Floors: 3 Floor
* Under Screen Stock Conveyor 800 mm Folding type
* Stock Conveyor 2 piece 500 mm Folding type
* Return system are provided with 2 piece 500 mm conveyor belts
* Mobile System Chassis 3-Axis scissor mobile carrier system.
* The hydraulic system has 6 hydraulic foot mechanism.
* After locked this foots, its strengthened with 6 fixed foot.
There are two lifting piston on the crusher for on and off. This two piston is controlled by a special remote control system. There are also 2-piston determines the pendulum adjustment and product size. With special arms product size can be determined.
Hydraulic Power System 60 liter
Magnetic Conveyor Belt 600 mm (Optional)
* Clipboard MAterial is Siemens Branded
* Clipboard system has a Abb Soft Starter Systemand a special control system
* Breaker control can be performed with Remote Control (Cable control system).
The amperage of the system can be checked myself maintenance.
Generator System is optional. Iin the world most preferred generator brands will be used if desired.
The capacity is 120-180 ton and it is variable according to crushing material, feeding and final product size.
Dedusting System, for to suppress the dust in conveyors, high-pressure water is spray nozzles and dust is blocked.
Feeders vibrators are Emtaş, Italvibras, Oli brand.
Main Belt pulley are rubberized and gear type.
Electric motors are Gamak, Emtaş and Abana brands.
* Reducers are special reducers with 3 indirect.
* Bearings: Ereğli Iron Steel product with A1 quality.
* By-pass system (optional)
* Magnetic magnet (optional)
* Generator System (Optional)
* Dedusting System (Optional)
* Frequency Control System is used instead Soft starter. (Optional)
* General 01 Closet Mobile Stone Crushing Plant support work with generator. Fuel consumption 19-21 liters / hour.
** All of our products are CE certified European Union.
** Total weight: 38,000 kg
** Transport Dimensions: Length 15,000 mm * Width 3,800 mm * Height 4,500 mm

MOBILE FEEDER
The linings can be changed and worn.
Bunker: It has 20 m3 capacity.
Drive: 2.2 x 2 Vibro-motor
Upper reservoirs: 10 mm thick ST37 standard sachets.
Side tanks: Made of ST37 standard sheet with a thickness of 10 mm.
Inner Lining: 8 mm HARDOX 500
The bunker reservoirs are folded together with folded sheets to make it as rigid.
The bunker is designed for truck emptying.
In order to prevent the stones from escaping to the machine during the discharge of the truck,
Chains.

MOBILE CRUSHER GNR-800 TURBO IMPACT CRUSHER
Type: GNR-800
Rotor Dimension: 1100x800mm
Engine: 132 Kw. 1500 rpm
Max Feeding: 1000 mm.
The shaft is 4140 alloy forged steel.
Bearings SKF is a trademark or equivalent type of heavy duty.
Welded steel constructions include fixed chassis and engine fiyata.
Crusher pallets, ribs 16-18% Mn. 2.2% Cralloyed
Side wear plates will be 30 mm sheet metal. Reduction and high cubic material ratio
They are crackers.

MOBILE SCREEN
Dimension: 1300 x4000 -3 floors
Drive: 11 kW
Bearings: Special vibration bearing
Screen Body: ST 37 Ereğli A1 quality 10mm, roller bearing 15mm reinforced
Screen Tension System: Special tension bolt The front trough structure is a side slip system.
By-pass Conveyor Belt 4.5 m 500 mm
Conveyor belt 800 mt
The conveyor belt is 10 m
Conveyor belt 500 pcs 8 mt 2 pcs
Conveyor belt 500 m 8 mt
Conveyor belt 500 mt 6.5 mt
Mobile Chassis System 2 Mobile system with axle scissors.
There are 6 hydraulic foot mechanisms in the hydraulic system. After these feet are locked, they are strengthened with 6 fixed feet. The crusher also has 2 lift pistons for opening and closing.

MOBILE FEEDER
Size 1000x3750 mm
TURBO CRUSHER
GNR-02 Type GNR-02
Rotor Dimension: 1120x1250mm
Engine: 200 Kw. 1500 rpm
Max Feeding: 900x550 mm.
Dimension: 1600 x5000 -3 floors
Drive: 15 kW
Bearings: Special vibration bearing
Screen Body: ST Ereğli A1 quality 10mm
Mobile Chassis System Mobile system with 3 axle shears.
There are 6 hydraulic foot mechanisms in the hydraulic system.
After these feet are locked, they are strengthened with 6 fixed feet.
** By-pass system (optional)
** Magnetic magnet (optional)
** Generator System (optional)
** Dust Removal System (optional)
* Frequency Control System Used in place of soft starter (optional)
** MOTORS: GAMAK, EMTAS, ABANA BRAND.
** VIBRO-MOTORS: OMB, OLY BRAND.
** REDUCTERS POLAT BRAND.
** Hydraulic band opening system (optional)
** Hydraulic feeder additional hopper opening system (optional)
** All our products are European Union CE certified.
** Total Weight: 52,000 Kg
** Shipping Sizes: Width 4000 mm x Length 17000 mm x Height 4500 mm
Mobile Crushing and Screening Plant GENERAL 02 Maximum feed size: 1000mm Ideal nutrition size: 0 - 800 mm Final size: 0 - 20 mm (0-5 mm, 5-12 mm, 12-20 mm or any other three types of materials and plus by-pass output production)
Capacity (t / s): 200-300 t / s By-pass can be obtained from the By-pass system.
The by-pass can be fed to the system if desired.
In addition, the final product can be taken 3 type.
Also the final product can taken 1 type.
All our products has CE certificate.